The most important preventative maintenance is to protect the end grain on the log post top. As with all of Nortek’s copper log post caps, they are handmade one at a time per order to fit your needs and will stand the test of time. By introducing any style of copper log post cap to your deck or dock posts, you are insuring years, and generations of maintenance free enjoyment.
We recommend using a good exterior adhesive such as our 3M 550FC Sealant available in our accessories section, when your copper caps have been fitted and you are ready to install them. No holes or tacks are included with the Tiara copper caps, as with the Sedona copper post caps.
Anti Theft / Tamper resistant screws are also available in the accessories section as well as the #14 Spanner Bits used on your power screw driver for installing them
To Measure for Post Caps, be sure to measure all your deck or dock posts to achieve a nice fit.
Take the widest diameter across the top of your deck or dock post. Caps are made in 1/4" increments, if your measurement falls in between sizes, it is up to you if you want to round up or down on the quarter inch. For a snugger fit when rounding down, you may need to remove a small amount of material from your post either by sanding or grinding with an angle head grinder and a rough grit of sand paper (60) grit. If you round up on the size your caps may be a little loose which can be cured with our sizing tape available in our accessories section. Applying a little clear caulk is also a nice finishing touch for those gaps between the log and post cap. * Due to the custom nature of our product line there are "No Returns" So be sure to measure your log diameter's twice and we'll cut the copper once.
For Larger Sizes call for a custom quote: 1-715-324-5748
We can also custom make Log end caps, purlin cover or beam cover / end caps to protect your exposed structural logs. Copper Cone piling caps / harbor caps or pier caps for your log posts are also available in our hand-hammered antique copper. Please call us with your measurements for a quote. A photo or drawing e-mailed is very helpful on custom applications.
Click here to get measuring instructions & Printable Price Schedule
Our Sedona and Tiara copper log end post caps are made of solid natural copper .032" thickness or 24 ounces / SQ FT or nearest gage (B & S) 20 and over time, will patina, developing a beautiful antique finish which will blend in with your log home decor.
Click here for Product Installations.pdf
All of Nortek's Tiara copper caps are made to order, so please be sure to measure carefully, as there are "no returns", allow approximately 3-4 weeks to ship. Click here for Shipping costs